Liqui Moly prices | buy online & get it at your door
 
Search
Filters

liqui Moly

banner

Own Best Liqui Moly Egypt for Engine 


Or on our Facebook Page Click Here

Choose Your Car Brand from Here if wanna get spare parts

View as
Sort by

Liqui Moly A/C SYSTEM CLEANER (SPRAY) 250ml

230.00 EGP
[
MINICASH 9.00 EGP per month
Used for cleaning and disinfecting air conditioning systems in passenger motor vehicles and commercial vehicles. The product can also be used for domestic air conditioning systems. Special cleaner for removing mold and bacteria simply and effectively from A/C systems without dismantling. Leaves behind a pleasantly fresh fragrance after cleaning. All service recommendations released by vehicle manufacturers regarding the cleaning of air conditioning systems are to be followed. Use biocides safely. Always read the label and product information before use. Packed in portions: One pack will treat one vehicle or one air conditioning system. If the manufacturer of the air conditioning system provides a cleaning service recommendation, this recommendation must be observed. If no model-specific instructions are available from the passenger car manufacturer, follow the LIQUI MOLY recommendation for application. Spray the cleaning fluid directly on the surface of the evaporator (if possible) for commercial vehicle, bus and home A/C systems. LIQUI MOLY recommended use: Make sure the window is open during the cleaning process. Avoid inhaling the vapors during cleaning. Check to make sure that the condensation water drainage openings are not blocked Dry the surface of the evaporator for 10 minutes with the engine running using the following heater and blower settings: Switch off the air conditioning unit and set to air circulation. Set the air distribution switch to footwell. Turn the temperature regulator and blower selector to maximum. Cleaning the air conditioning system: Insert the probe of the cleaner toward the evaporator (center of the vehicle) (see vehicle-specific instructions at www.liqui-moly.biz). Actuate the cleaner and move the spray probe carefully back and forth to flush out and clean the evaporator thoroughly. Allow 15 - 20 minutes for the cleaning fluid to take effect. Dry the surface of the evaporator for 10 minutes with the heater and blower at the same setting as prior to cleaning. Replace the dust and pollen filter. Note: Any cleaner which is spilled must be wiped up using a damp cloth and water.

Liqui Moly DIESEL PURGE 1 l

180.00 EGP
[
MINICASH 7.00 EGP per month
For all diesel engines both with and without diesel particulate filters. Preventative during every inspection, after repairs on the fuel system or to solve problems (see application description on the pack or in the technical datasheet). Turbocharger tested. Perfectly compatible with all conventional diesel and biodiesel fuels. Can contents are sufficient for up to 75 l fuel. Removes deposits on injection nozzles and in the combustion chamber. Increases the cetane number. Eliminates engine operation problems such as knocking in idle and provides round and quiet engine running. Protects the entire fuel system from corrosion. Optimizes the emission test values. Can also be used as a preventative measure. Clean engines need less fuel and reduce emissions. Preventive use Fill the fuel filter with Diesel Purge when exchanging it. Pour the remaining contents of the can into the tank. Problem-specific use Disconnect the fuel feed line and insert it in the Diesel Purge. Seal the fuel return line or insert it in the Diesel Purge. Start the engine and allow it to run with the unmixed Diesel Purge at various speeds. Install the vehicle’s own system after the cleaning process. In cases of extreme contamination, repeat the cleaning process where necessary. As an alternative to problem-specific use, cleaning with our JetClean device is also possible. To do this, pour 2 - 3 liters of Diesel Purge into the JetClean tank. The instructions for use for the device describe the further application.
// WhatsApp number // Call to action