Opel Vectra B 1996 - 2003 Spare Parts

Liqui Moly OIL SLUDGE FLUSH 300ML

180.00 EGP

[

MINICASH 7.00 EGP per month

Suitable for all commercially available motor oils in gasoline and diesel engines with and without a diesel particulate filter (DPF). Tested for use with turbochargers and catalytic converters. Add approx. 200 km before the oil change. Contents sufficient to treat up to 5 liters of motor oil. Can be safely used in vehicles with timing belt running in oil. Not suitable for motorbikes with a wet clutch. The perfect solution for cleaning the engine from the inside. Removes black sludge and other contaminants and deposits. Increases the operational reliability of the engine and prevents lubrication deficiency. Gently cleans oil holes, oil screens, piston ring grooves and ducts and prevents engine damage.

Liqui Moly ONE FOR ALL DEEP TREATMENT 250ml

180.00 EGP

[

MINICASH 7.00 EGP per month

Suitable for cars, hobby, household and garden, e.g. for car cockpits, door rubbers, plastic bumpers, garden furniture, sealed wooden surfaces, leather, window frames, PVC awnings, etc. For interior and exterior use. Universal agent for cleaning, preservation, care and protection. Gives even heavily weathered plastic surfaces a silky matt shine thanks to highly concentrated care products. Repels dirt, dust and water and provides food long-term protection.

Liqui Moly PAINT POLISHING CREAM 300g

240.00 EGP

[

MINICASH 9.00 EGP per month

For both new and slightly weathered colored and metallic paints. Cleans, polishes and protects. For radiant gloss through carnauba wax. Offers outstanding protection against damaging environments. Evens out small hairline scratches and restores the finish gloss. Provides the paint with deep gloss. The original appearance of matt paintwork is easily restored. Its creamy consistency means sparing use. Before application, thoroughly clean the paint surfaces to be treated and dry them carefully. Remove Paint Polishing Cream from the can using a soft rag, polishing cloth or sponge and apply thinly and evenly using light pressure and circular movements. Only treat one section at a time. Allow Paint Polishing Creme to dry until it forms a matt coat. Then remove with LIQUI MOLY Microfiber Cloth (part no. 1651) and polish the surface to a high sheen. Do not use under strong sunlight or on warm paint surfaces. Protect against frost. Regular application gives the optimum results.

Liqui Moly PLASTIC DEEP TREATMENT 300ml

260.00 EGP

[

MINICASH 10.00 EGP per month

Especially for maintaining and protecting all plastic finishes in the automotive sector, campers, boats, sports articles and household. For indoors and outdoors. Cleans, maintains and protects all plastic and rubber parts and freshens them up. Deep penetration into the plastic ensures long-lasting action. Acts antistatic and dirt repellent. For a silky gloss. Also perfectly suitable for plastics in the house, hobby and garden area. Contains silicon.

Liqui Moly PLASTIC DEEP TREATMENT LOTION 250ml

210.00 EGP

[

MINICASH 8.00 EGP per month

Especially for maintaining and protecting all plastic finishes in the automotive sector, campers, boats, sports articles and household. For indoors and outdoors. Cleans, maintains and protects all plastic and rubber parts and freshens them up. Deep penetration into the plastic ensures long-lasting action. Acts antistatic and dirt repellent. For a silky gloss. Also perfectly suitable for plastics in the house, hobby and garden area. Contains silicon.

Liqui Moly POLISH & WAX 500ml

260.00 EGP

[

MINICASH 10.00 EGP per month

Especially for non-ferrous and me tallic paints. Do not use on matt paints! Cleans, polishes, protects and shines. With outstanding long-time protection. Even protects against harmful environmental influences. For radiant high luster. Cleans, polishes and preserves in one step. Regular use provides optimal paint care. Suitable for polishers. First, thoroughly clean the surfaces to be polished and dry them carefully. Shake Wax & Polish vigorously before use and pour onto a soft rag, polishing cloth or sponge. Apply thinly and evenly to the paint surface using circular movements and slight pressure. Only treat one section at a time. Allow Wax and Polish to dry until it forms a matt coat. Remove this and polish using a clean, dry cloth. Do not use under direct heat or on warm paint surfaces. Regular application gives the optimum results. Between treatments, use Liqui Moly Hard Wax.

liqui moly Power stearing leak stop 35ml

105.00 EGP

[

MINICASH 4.00 EGP per month

Liqui Moly PRO-LINE RAPID RUST SOLVENT 300ml

125.00 EGP

[

MINICASH 5.00 EGP per month

Suitable for the business and workshop as well as on vehicles and on all household and hobby appliances. Extremely fast rust solvent with outstanding creep effect. Dissolves rust and dirt. Infiltrates and undermines moisture. Has excellent lubrication properties. Does not react with plastics, paints or metals. Shake well before use. Depending on application, spray on in the desired quantity. The fold-out capillary tube ensures precision spraying. With the capillary tube folded in, large areas are sprayed. Spray large areas without the capillary tube from about 20-25 cm. Also sprays when inverted.

Liqui Moly RADIATOR CLEANER 300ml

125.00 EGP

[

MINICASH 5.00 EGP per month

For all coolant and heating systems in water-cooled engines. 300 ml is sufficient for 10 l of coolant (dosage 1:33). Compatible with all conventional coolant additives and antifreezes. Deposits in the cooling/heating system create blockages for heat exchange and they also block thermostat valves and control mechanisms. When engine temperatures are too high, the engine runs uneconomically and suffers excessive wear at considerable risk of damage. LIQUI MOLY Radiator Cleaner removes deposits containing oil and lime, and ensures that the engine runs reliably and at the optimum temperature. Does not contain aggressive acids or alkalis. Add contents to the cooling water. Then start up the heater and, depending on the level of contamination, let the engine run at operating temperature for 10 – 30 min. After finishing cleaning, drain the coolant/cleaner mixture, thoroughly flush the cooling system with water and refill it according to the manufacturer’s instructions. The content (300 ml) is sufficient for 10 l of coolant (dosage 1:33).

Liqui Moly RADIATOR STOP LEAK 150ml

105.00 EGP

[

MINICASH 4.00 EGP per month

For radiator coolant and heating systems with and without water filters. Also suitable for aluminum and plastic radiators. Contents will treat up to 10 liters of coolant (dosage 1:66). Compatible with all conventional coolant additives and antifreezes. Can also be used preventively. It’s not easy to find small leaks caused by stone chipping, porous soldered connections or hairline fractures in the cooling system on all water-cooled engines – the only clue is in the reduced coolant level. Radiator Sealant seals these types of leaks completely, easily and in an instant and safeguards the combustion chamber against damage caused by coolant ingress. Shake well before use. Add contents to the cold cooling system. Start up the heater. Then drive the vehicle for at least 10 minutes. Contents will treat up to 10 liters of coolant (dosage 1:66).

Liqui Moly REARVIEW MIRROR ADHESIVE SET 1ml

115.00 EGP

[

MINICASH 5.00 EGP per month

Developed for gluing rear-view mirror feet made of metal to windshields and for hinges on vent side-windows. Special set with glue cartridge and special fleece. Outstanding unequal thermal expansion equalization. The bonding surfaces must be dry and free of dirt, grease and oil residues. For cleaning, we recommend LIQUI MOLY Cleaner and Thinner (part no. 6130). The impregnated nylon grid is used as a bonding agent and should be trimmed to the size of the area to be bonded. Next, hold the component to be bonded on the surface of the glass and mark the desired position. Now apply the adhesive to the component to be bonded and place the grid on top. The component is then attached to the marked glass surface and held there with slight pressure for approx. 2 min. The mirror can be mounted on the base after approx. 15 minutes. The adhesive is fully dry after approx. 24 hours.

Liqui Moly SCRATCH STOP 200ml

210.00 EGP

[

MINICASH 8.00 EGP per month

Specially developed product for the removal of scratches. Suitable for colored and metallic paints. Ideally suited for treating matt/dull plastic windows or headlamp lenses made of polycarbonate. Silicone oil-free, universal grinding paste. The product is suitable for the removal of scratches, paint mist, traces of grinding and orange-peel surface on colored and metallic paints. The product is suitable for manual and mechanical treatment. Wash the vehicle thoroughly before application. Shake the tube before use. Apply the product with a cloth or sponge and work it into the affected area under light pressure (polish with a foam buffing machine at 1,500 to 2,000 rpm). Exercise caution during application on chassis joints, as the product is extremely abrasive. Wipe off any polish residue using a clean cloth (preferably a microfibre cloth). After the procedure is completed, seal the paintwork surface using Universal Polish (part no. 1679).

Liqui Moly SILICONE GREASE TRANSPARENT 100g

220.00 EGP

[

MINICASH 9.00 EGP per month

For lubricating sunroofs, seat rails, door hinges, rods, etc. Lubricant with diverse application areas at all temperatures. With outstanding separation and lubrication properties, e.g. for metal/plastic pairings, high resistance to oxidation and low tendency to evaporate. It is resistant to both cold and hot water, resistant to aging and temperature stable, it seals out contamination and can be delivered by centralized lubrication systems. Can be used in slightly acidic or slightly alkaline areas. Also suitable for lubricating roller and plain bearings with low bearing pressures. Labeling according to DIN 51502 KSI2 S-40. Operating temperature range: -40 °C to +200 °C

Liqui Moly SILICONE SEALING COMPOUND, BLACK 80ml

125.00 EGP

[

MINICASH 5.00 EGP per month

For sealing oil and transmission pans, engine housings, differentials, valve covers, water pumps, spur gear covers, headlamps, taillamps, battery boxes, etc. For metal parts, plastic and glass. High-quality and easy-to-use silicone-based sealing compound. The automatic cartridge removes the need for a cartridge gun when processing. With outstanding resistance to cold, heat and aging. Stays permanently elastic and is resistant to chemicals, oils, etc. Can withstand temperatures from -40 °C to +250 °C (short periods up to +300 °C). The surfaces to be sealed must be clean, dry and free of oil and grease. Apply material evenly and join parts immediately without flash-off time. Note: Insufficient adhesion can be expected on substrates such as PP, PE, Teflon and bitumen. That is why we recommend carrying out an adhesion test before use.

Liqui Moly SILICONE SEALING COMPOUND, RED 80ml

135.00 EGP

[

MINICASH 5.00 EGP per month

For sealing oil and transmission pans, engine housings, differentials, valve covers, water pumps, spur gear covers, headlamps, taillamps, battery boxes, etc. For metal parts, plastic and glass. High-quality and easy-to-use silicone-based sealing compound. The automatic cartridge removes the need for a cartridge gun when processing. With outstanding resistance to cold, heat and aging. Stays permanently elastic and is resistant to chemicals, oils, etc. Can withstand temperatures from -40 °C to +250 °C (short periods up to +300 °C). The surfaces to be sealed must be clean, dry and free of oil and grease. Apply material evenly and join parts immediately without flash-off time. Note: Insufficient adhesion can be expected on substrates such as PP, PE, Teflon and bitumen. That is why we recommend carrying out an adhesion test before use.

Liqui Moly SILICONE SPRAY 300ml

135.00 EGP

[

MINICASH 5.00 EGP per month

Outstanding lubricant for sunroof and seat tracks, carburetor control linkages, door and window hinges. Care and protective product for plastics and rubber. Separator agent during inert welding. For noise elimination on plastic trims. is a mineral oil and grease free isolation, lubricant and protective agent on silicone basis. For plastics, rubber, metal and wood. Clean application. Thinly spray on the parts to be treated and let dry. Eliminates bothersome noises in synthetics. Impregnates and insulates. Pleasant scent. Spray a thin and even coating onto the components to be treated and repeat the treatment if necessary. Do not work in the vicinity of painted areas. It must be ensured that Silicone Spray is not sprayed on food or on machine components which come into direct contact with food.

Liqui Moly SPECIAL RIM CLEANER 0.5 liter

200.00 EGP

[

MINICASH 8.00 EGP per month

Especially for caring for, cleaning and maintaining the value of all kinds of rims. Also perfectly suitable before using the carwash. Do not use on hot rims or in direct sunlight. With dirt indicator. For gentle and intensive cleaning of all aluminum and steel rims. Prevents stubborn re-soiling. Periodic rim care gives your rims luster and secures long service life. The rims will look like new. Effortlessly cleans and removes brake dust and other dirt. Special Rim Cleaner is highly biodegradable. Acid free.

Liqui Moly SPEED TEC 250ml

200.00 EGP

[

MINICASH 8.00 EGP per month

Suitable for all 2- and 4-cycle gasoline engines. Tested safe with catalytic converters and turbochargers. For adding directly to the fuel tank. Can contents are sufficient for up to 70 l fuel. Perfect for constant use for any kind of refueling. This highly modern fuel additive was specially developed to noticeably improve acceleration and throttle response under partial load. Provides more driving pleasure through optimized performance yield. The engine starts better and even runs more smoothly.

Liqui Moly SUPER K CLEANER 250ml

125.00 EGP

[

MINICASH 5.00 EGP per month

For paints, metals, chrome, plastics* and textile materials (upholstery, interior trim, roof lining, footwell mats and trunk mats) in the interior and exterior of motor vehicles. Powerful universal cleaner. Thoroughly and gently removes sooty, dusty, oily and greasy soiling as well as brake dust, insect remains and bird droppings. If used properly, does not attack metals or plastics (*exceptions: polycarbonate and PMMA), wood, glass, rubber, cured paints or textiles.

Liqui Moly UNDERSEAL BITUMEN, BLACK 500ml

180.00 EGP

[

MINICASH 7.00 EGP per month

For covering spray paint mist in wheel arches and for repairing or complementing existing coatings on vehicle underbodies. Corrosions protection agent that forms a toughened, sealed, protective film when dry. The bituminous coating material has good anti-droning action and high abrasion resistance. High amount of solids content. Cannot be painted over. The surfaces which have to be treated with underseal must be thoroughly cleaned beforehand. Rust must be removed. The surfaces must be dry and free of wax, dirt and grease and extensively free of dust. Underseal can be applied using the UBS spray gun, Part no. 6219 or the pressure-feed spray gun, Part no. 6220 with an operating pressure of 2 - 8 bar depending on the spray pattern desired. Shake contents of can vigorously before use. Do not leave containers open as the material will form a skin on the surface. The coating material can be applied to vertical surfaces with wet film thicknesses of up to 1.5 mm. It is better to proceed in cross patterns to avoid spray shadowing. The vehicle will be ready to drive after about 2 hours, depending on the weather conditions and coating thickness. Final through-drying takes approx. 12 - 24 hours.

Opel Vectra B 1996 - 2003 Spare Parts

Own Best Opel Vectra B 1996 - 2003 Spare Parts In Egypt

Or on our Facebook Page Click Here