منظف البخاخات وغرفة الاحتراق Liqui Moly DIESEL PURGE 1 L من ليكوي مولي لمحركات الجاز فقط

For all diesel engines both with and without diesel particulate filters. Preventative during every inspection, after repairs on the fuel system or to solve problems (see application description on the pack or in the technical datasheet). Turbocharger tested. Perfectly compatible with all conventional diesel and biodiesel fuels. Can contents are sufficient for up to 75 l fuel. Removes deposits on injection nozzles and in the combustion chamber. Increases the cetane number. Eliminates engine operation problems such as knocking in idle and provides round and quiet engine running. Protects the entire fuel system from corrosion. Optimizes the emission test values. Can also be used as a preventative measure. Clean engines need less fuel and reduce emissions. Preventive use Fill the fuel filter with Diesel Purge when exchanging it. Pour the remaining contents of the can into the tank. Problem-specific use Disconnect the fuel feed line and insert it in the Diesel Purge. Seal the fuel return line or insert it in the Diesel Purge. Start the engine and allow it to run with the unmixed Diesel Purge at various speeds. Install the vehicle’s own system after the cleaning process. In cases of extreme contamination, repeat the cleaning process where necessary. As an alternative to problem-specific use, cleaning with our JetClean device is also possible. To do this, pour 2 - 3 liters of Diesel Purge into the JetClean tank. The instructions for use for the device describe the further application.